Discussion:
[binutils-gdb] Delay setting up compressed debug section names
(too old to reply)
sergiodj+
2015-04-23 23:44:26 UTC
Permalink
*** TEST RESULTS FOR COMMIT 3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5 ***

Author: H.J. Lu <***@gmail.com>
Branch: master
Commit: 3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Delay setting up compressed debug section names
When we set up st_name for output section name in elf_fake_sections, we
don't know if the compressed DWARF debug section will be smaller. We may
end up with compressed DWARF debug sections which are bigger than the
uncompressed ones. This patch delays setting up st_name for output DWARF
debug section to _bfd_elf_assign_file_positions_for_non_load which will
compress the output debug section. We also postpone placement of shstrtab
section after DWARF debug sections have been compressed. The net effect
is .shstrtab section is now placed after .symtab and .strtab sections.

bfd/

PR ld/18277
* compress.c (bfd_compress_section_contents): Remove the
write_compress argument.
(bfd_init_section_compress_status): Updated.
(bfd_compress_section): Likewise.
* elf.c (_bfd_elf_set_reloc_sh_name): New.
(_bfd_elf_init_reloc_shdr): Add delay_st_name_p. Set sh_name
to (unsigned int) -1 if delay_st_name_p is TRUE. Use
_bfd_elf_set_reloc_sh_name.
(elf_fake_sections): Don't rename DWARF debug section for
linker output if it will be compressed. Instead, set
delay_st_name_p to TRUE and pass it to _bfd_elf_init_reloc_shdr.
(assign_section_numbers): Call _bfd_elf_strtab_addref only if
sh_name != (unsigned int) -1. Don't finalize nor assign
shstrtab section here. Delay setting output section names to
_bfd_elf_write_object_contents.
(_bfd_elf_compute_section_file_positions): Update comments on
sh_offset for shstrtab section.
(assign_file_positions_for_non_load_sections): Set sh_offset to
-1 for shstrtab section.
(assign_file_positions_except_relocs): Likewise.
(_bfd_elf_assign_file_positions_for_non_load): Set up sh_name
when compressing DWARF debug sections. Place shstrtab section
after DWARF debug sections have been compressed.
(_bfd_elf_write_object_contents): Setting sh_name for output
sections.

ld/testsuite/

PR ld/18277
* ld-elf/compressed1d.d: New.
* ld-elf/compressed1e.d: Likewise.
sergiodj+
2015-04-23 23:44:26 UTC
Permalink
Buildslave:
fedora-21-ppc64le-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-native-extended-gdbserver-m64/builds/797>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-native-extended-gdbserver-m64/.git/tree/?h=master&id=fde801056cd0e3187fefca4b89995f8138a69d03>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/interrupt.exp: child died when we called func1, skipped rest of tests
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/fork-thread-pending.exp: 1, get to the fork event (timeout)
FAIL: gdb.threads/fork-thread-pending.exp: 1, multiple threads found (the program exited)
============================
sergiodj+
2015-04-23 23:45:23 UTC
Permalink
Buildslave:
wildebeest-debian-wheezy-i686

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/853>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0fc97a360c3b43f55b9eb829f3e9b3a843046ebf>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.arch/i386-biarch-core.exp: .text is readable
new FAIL: gdb.arch/i386-biarch-core.exp: core-file
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at a function only for a selected ASM file.
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at a global function only for a selected ASM file.
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at function in all instances for a selected ASM file.
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================
sergiodj+
2015-04-23 23:54:48 UTC
Permalink
Buildslave:
fedora-21-ppc64le-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/794>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=master&id=e7554423f18a0719ac4184aa775ad4ef021d4db3>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/callfuncs.exp: continue after stop in call dummy preserves register contents
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.base/callfuncs.exp: continue after stop in call dummy preserves register contents
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: step
FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: with thread-specific bp: step: step
============================
sergiodj+
2015-04-23 23:55:23 UTC
Permalink
Buildslave:
wildebeest-debian-wheezy-x86_64

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-x86_64-native-extended-gdbserver-m64/builds/883>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Debian-x86_64-native-extended-gdbserver-m64/.git/tree/?h=master&id=ce8f6d55225a4cfd753c25a988a6cd00f0b81217>

*** Regressions found ***
============================
new FAIL: gdb.threads/attach-into-signal.exp: threaded: process is still running on the attempt # 1 of 100
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: process is still running on the attempt # 1 of 100
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.dwarf2/gdb-index.exp: touch binary
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call============================
sergiodj+
2015-04-23 23:57:22 UTC
Permalink
Buildslave:
marist-fedora-s390x

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/496>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-s390x-m64/.git/tree/?h=master&id=05a404ffcffec20d0cdc83d9f8d8cb004fca648f>

*** Regressions found ***
============================
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
PASS -> FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: -trace-find frame-number 0
PASS -> FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: tfind 0 again
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/async-shell.exp: process stopped (timeout)
FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: step
FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: with thread-specific bp: next: next
============================
sergiodj+
2015-04-24 00:02:05 UTC
Permalink
Buildslave:
fedora-21-ppc64be-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-m64/builds/877>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-m64/.git/tree/?h=master&id=d0dfcbbe574d8396105ed3b4933489c90788b2ba>

*** Regressions found ***
============================
new FAIL: gdb.base/valgrind-db-attach.exp: bt
new FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
new FAIL: gdb.mi/mi-nsmoribund.exp: thread state: all running except the breakpoint thread (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.base/valgrind-db-attach.exp: bt
new FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
new FAIL: gdb.mi/mi-nsmoribund.exp: thread state: all running except the breakpoint thread (timeout)
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
FAIL: gdb.base/auxv.exp: continue (timeout)
FAIL: gdb.base/auxv.exp: info auxv on native core dump (timeout)
FAIL: gdb.base/auxv.exp: load core file for info auxv on gcore-created dump (timeout)
FAIL: gdb.base/auxv.exp: load core file for info auxv on native core dump (timeout)
FAIL: gdb.base/auxv.exp: matching auxv data from live and core
FAIL: gdb.base/auxv.exp: matching auxv data from live and gcore
FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: next: next
FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: step
FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: with thread-specific bp: next: next
FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: with thread-specific bp: step: step
============================
sergiodj+
2015-04-24 00:08:05 UTC
Permalink
Buildslave:
wildebeest-debian-wheezy-i686

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-i686-native-gdbserver/builds/840>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-gdbserver/.git/tree/?h=master&id=dd7718f686485689450161075484277345a3f5a3>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.arch/i386-biarch-core.exp: .text is readable
new FAIL: gdb.arch/i386-biarch-core.exp: core-file
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
PASS -> FAIL: gdb.base/gnu-ifunc.exp: step
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at a function only for a selected ASM file.
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at a global function only for a selected ASM file.
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at function in all instances for a selected ASM file.
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
============================
sergiodj+
2015-04-24 00:09:03 UTC
Permalink
Buildslave:
fedora-21-ppc64be-2

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-extended-gdbserver-m64/builds/871>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-native-extended-gdbserver-m64/.git/tree/?h=master&id=a40369ff9d3656009715ab1f127b8bb153b586fc>

*** Regressions found ***
============================
new FAIL: gdb.base/auxv.exp: continue (timeout)
new FAIL: gdb.base/catch-syscall.exp: set tdesc filename /home/gdb-buildbot/fedora-21-ppc64be-2/fedora-ppc64be-native-extended-gdbserver/build/gdb/testsuite/outputs/gdb.base/catch-syscall/trivial.xml (got interactive prompt)
new FAIL: gdb.base/corefile.exp: attach: core file is cleared
new FAIL: gdb.base/corefile.exp: attach: with core
new FAIL: gdb.base/corefile.exp: run: core file is cleared
new FAIL: gdb.base/corefile.exp: run: with core
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.base/interrupt.exp: echo data (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.base/interrupt.exp: echo data (timeout)
new FAIL: gdb.base/interrupt.exp: echo more data (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file
new FAIL: gdb.base/interrupt.exp: send end of file (timeout)
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/func-ptrs.exp: stop in sentinel (timeout)
FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (timeout)
FAIL: gdb.reverse/until-precsave.exp: finish to main (timeout)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: set reverse execution (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (timeout)
FAIL: gdb.reverse/until-precsave.exp: advance to marker2
FAIL: gdb.reverse/until-precsave.exp: finish to main
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: set reverse execution
FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (got interactive prompt)
FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
FAIL: gdb.gdb/selftest.exp: backtrace through signal handler (timeout)
FAIL: gdb.gdb/selftest.exp: send SIGINT signal to child process (timeout)
FAIL: gdb.base/func-ptrs.exp: stop in sentinel
FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (timeout)
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2
FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (timeout)
FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (timeout)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame
============================
sergiodj+
2015-04-24 00:35:25 UTC
Permalink
Buildslave:
fedora-x86-64-2

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/930>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m32/.git/tree/?h=master&id=fb89c724d41dd772c5c2a3f21582d6860c33521b>

*** Regressions found ***
============================
new FAIL: gdb.base/interrupt.exp: echo data (the program exited)
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: echo data (the program exited)
new FAIL: gdb.base/interrupt.exp: echo more data (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file
new FAIL: gdb.base/interrupt.exp: send end of file (timeout)
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/arraydim.exp: print m'first
FAIL: gdb.ada/arraydim.exp: print m'first(1)
FAIL: gdb.ada/arraydim.exp: print m'first(2)
FAIL: gdb.ada/arraydim.exp: print m'first(3)
FAIL: gdb.ada/arraydim.exp: print m'last
FAIL: gdb.ada/arraydim.exp: print m'last(1)
FAIL: gdb.ada/arraydim.exp: print m'last(2)
FAIL: gdb.ada/arraydim.exp: print m'last(3)
FAIL: gdb.ada/arraydim.exp: print m'length
FAIL: gdb.ada/arraydim.exp: print m'length(1)
FAIL: gdb.ada/arraydim.exp: print m'length(2)
FAIL: gdb.ada/arraydim.exp: print m'length(3)
FAIL: gdb.ada/arrayidx.exp: print e_one_two_three
FAIL: gdb.ada/arrayidx.exp: print e_one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print empty
FAIL: gdb.ada/arrayidx.exp: print empty, indexes off
FAIL: gdb.ada/arrayidx.exp: print few_reps
FAIL: gdb.ada/arrayidx.exp: print few_reps, indexes off
FAIL: gdb.ada/arrayidx.exp: print many_reps
FAIL: gdb.ada/arrayidx.exp: print many_reps, indexes off
FAIL: gdb.ada/arrayidx.exp: print one_two_three
FAIL: gdb.ada/arrayidx.exp: print one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print p_one_two_three
FAIL: gdb.ada/arrayidx.exp: print p_one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print r_two_three
FAIL: gdb.ada/arrayidx.exp: print r_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print u_one_two_three
FAIL: gdb.ada/arrayidx.exp: print u_one_two_three, indexes off
FAIL: gdb.ada/arrayparam.exp: print first after function call
FAIL: gdb.ada/arrayparam.exp: print last after function call
FAIL: gdb.ada/arrayparam.exp: print length after function call
FAIL: gdb.ada/bp_enum_homonym.exp: run to pck.archive breakpoint
FAIL: gdb.ada/bp_range_type.exp: print small_value
FAIL: gdb.ada/bp_range_type.exp: run to breakpoint
FAIL: gdb.ada/char_param.exp: call next
FAIL: gdb.ada/char_param.exp: print procedure_result after calling next
FAIL: gdb.ada/char_param.exp: print procedure_result after calling same
FAIL: gdb.ada/complete.exp: complete p external_ident
FAIL: gdb.ada/complete.exp: complete p some
FAIL: gdb.ada/complete.exp: interactive complete 'print some' (timeout)
FAIL: gdb.ada/cond_lang.exp: continue (the program is no longer running)
FAIL: gdb.ada/dyn_arrayidx.exp: ptype array_type
FAIL: gdb.ada/enum_idx_packed.exp: print full'first
FAIL: gdb.ada/expr_delims.exp: Check that watchpoint is set correctly.
FAIL: gdb.ada/expr_delims.exp: Print variable 'thread'
FAIL: gdb.ada/expr_delims.exp: Set conditional watchpoint.
FAIL: gdb.ada/expr_delims.exp: Set plain watchpoint on variable 'thread'
FAIL: gdb.ada/expr_delims.exp: continue (the program is no longer running)
FAIL: gdb.ada/exprs.exp: long_float'max
FAIL: gdb.ada/exprs.exp: long_float'min
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 10
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 20
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 20.0
FAIL: gdb.ada/fixed_points.exp: p on a new fixed point type
FAIL: gdb.ada/fixed_points.exp: p on a subtype fixed point type
FAIL: gdb.ada/fixed_points.exp: print Overprecise_Object
FAIL: gdb.ada/fixed_points.exp: ptype Overprecise_Object
FAIL: gdb.ada/float_param.exp: call set_double(1, 3.0)
FAIL: gdb.ada/float_param.exp: call set_long_double(1, global_small_struct, 4.0)
FAIL: gdb.ada/float_param.exp: print global_double
FAIL: gdb.ada/float_param.exp: print global_float
FAIL: gdb.ada/float_param.exp: print global_long_double
FAIL: gdb.ada/formatted_ref.exp: print s.x = 13
FAIL: gdb.ada/formatted_ref.exp: print/x s'access
FAIL: gdb.ada/homonym.exp: continue until BREAK_2 (the program is no longer running)
FAIL: gdb.ada/homonym.exp: print lcl at BREAK_1
FAIL: gdb.ada/homonym.exp: print lcl at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype int_type at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype lcl at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype lcl at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype local_type at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype local_type at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_2
FAIL: gdb.ada/interface.exp: print s
FAIL: gdb.ada/iwide.exp: print d_access.all
FAIL: gdb.ada/iwide.exp: print dp_access.all
FAIL: gdb.ada/iwide.exp: print s_access.all
FAIL: gdb.ada/iwide.exp: print sp_access.all
FAIL: gdb.ada/lang_switch.exp: backtrace
FAIL: gdb.ada/lang_switch.exp: backtrace with lang set to C
FAIL: gdb.ada/mi_dyn_arr.exp: Create bt varobj
FAIL: gdb.ada/mi_dyn_arr.exp: run to foo.adb:22 (exec-continue) (MI error)
FAIL: gdb.ada/mi_dyn_arr.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions const.aint
FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions task
FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
FAIL: gdb.ada/mi_interface.exp: list ggg1's children
FAIL: gdb.ada/mi_interface.exp: run to foo.adb:22 (exec-continue) (MI error)
FAIL: gdb.ada/mi_interface.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.ada/mi_task_info.exp: -ada-task-info 3
FAIL: gdb.ada/null_array.exp: print my_matrix
FAIL: gdb.ada/null_array.exp: ptype my_table
FAIL: gdb.ada/operator_bp.exp: continue to "&" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "*" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "**" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "+" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "-" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "/" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "<" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "<=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ">" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ">=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "abs" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "and" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "mod" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "not" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "or" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "rem" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "xor" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."&" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."*" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."**" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."+" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."-" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."/" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."<" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."<=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops.">" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops.">=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."abs" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."and" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."mod" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."not" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."or" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."rem" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."xor" (the program is no longer running)
FAIL: gdb.ada/packed_array.exp: print &var
FAIL: gdb.ada/packed_array.exp: print u_var
FAIL: gdb.ada/packed_array.exp: ptype &var
FAIL: gdb.ada/packed_tagged.exp: ptype x
FAIL: gdb.ada/pkd_arr_elem.exp: print test.str
FAIL: gdb.ada/pkd_arr_elem.exp: print test.str(1)
FAIL: gdb.ada/pp-rec-component.exp: print /r before
FAIL: gdb.ada/pp-rec-component.exp: print before
FAIL: gdb.ada/print_chars.exp: print WC
FAIL: gdb.ada/print_chars.exp: print WWC
FAIL: gdb.ada/py_range.exp: python print(int(gdb.parse_and_eval('ir')))
FAIL: gdb.ada/py_range.exp: python print(int(gdb.parse_and_eval('si')))
FAIL: gdb.ada/rdv_wait.exp: task 2
FAIL: gdb.ada/set_pckd_arr_elt.exp: continue to update_small (the program is no longer running)
FAIL: gdb.ada/tagged.exp: print obj
FAIL: gdb.ada/tagged.exp: print segm
FAIL: gdb.ada/tagged.exp: ptype obj
FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
FAIL: gdb.ada/task_bp.exp: run to dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:pck.dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:pck.dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.dummy_task - from psymtab
FAIL: gdb.ada/tasks.exp: break break_me task 1
FAIL: gdb.ada/tasks.exp: break break_me task 3
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print cold'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print prim'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print vars'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype cold'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype full'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype prim'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype vars'length
FAIL: gdb.ada/type_coercion.exp: p q
FAIL: gdb.ada/type_coercion.exp: print {Integer} $addr
FAIL: gdb.ada/type_coercion.exp: save q'address in convenience variable
FAIL: gdb.ada/type_coercion.exp: set {Integer} $addr := 19
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: continue to STOP2 (the program is no longer running)
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_Object.Ptr when null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when no longer null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when no longer null <<2>>
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_object after setting Ptr
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_object.ptr.all
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_p_object after setting Ptr
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_p_object.ptr.all
FAIL: gdb.ada/var_arr_attrs.exp: print my_object.data'last
FAIL: gdb.ada/var_arr_attrs.exp: print my_object.data'length
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'first
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'last
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'length
FAIL: gdb.ada/variant_record_packed_array.exp: print address
FAIL: gdb.ada/variant_record_packed_array.exp: print adress content
FAIL: gdb.ada/watch_arg.exp: Continuing to second breakpoint (the program is no longer running)
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object with null Ptr
FAIL: gdb.ada/mi_var_array.exp: Create bt varobj
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.ada/mi_var_array.exp: run to bar.adb:28 (exec-continue) (MI error)
FAIL: gdb.ada/mi_var_array.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
FAIL: gdb.threads/print-threads.exp: all threads ran once (fast) (total 4 threads ran)
FAIL: gdb.threads/print-threads.exp: all threads ran once (slow with kill breakpoint) (total 4 threads ran)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2
FAIL: gdb.threads/print-threads.exp: all threads ran once
FAIL: gdb.threads/print-threads.exp: all threads ran once (slow) (total 4 threads ran)
FAIL: gdb.threads/watchthreads2.exp: all threads started
FAIL: gdb.threads/watchthreads2.exp: run to thread_started
============================
sergiodj+
2015-04-24 01:05:37 UTC
Permalink
Buildslave:
wildebeest-debian-wheezy-i686

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-i686-native-extended-gdbserver/builds/836>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-extended-gdbserver/.git/tree/?h=master&id=3945b5795b5315def345a90e67a416dd2f03d10a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.arch/i386-biarch-core.exp: .text is readable
new FAIL: gdb.arch/i386-biarch-core.exp: core-file
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/gnu-ifunc.exp: step
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at a function only for a selected ASM file.
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at a global function only for a selected ASM file.
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at function in all instances for a selected ASM file.
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/dyn_arrayidx.exp: ptype array_type
FAIL: gdb.ada/mi_var_array.exp: Create bt varobj
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.ada/mi_var_array.exp: run to bar.adb:28 (exec-continue) (MI error)
FAIL: gdb.ada/mi_var_array.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=step: next over function call
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
============================
sergiodj+
2015-04-24 01:13:42 UTC
Permalink
Buildslave:
fedora-x86-64-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m64/builds/949>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m64/.git/tree/?h=master&id=02fcfea9a330b6490e4e4e10e5bcb605c0e55044>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on (got interactive prompt)
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads (GDB internal error)
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=step: next over function call
============================
sergiodj+
2015-04-24 01:32:09 UTC
Permalink
Buildslave:
fedora-x86-64-2

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/925>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-gdbserver-m64/.git/tree/?h=master&id=3de48dd7201ecfb53b7e3fb1c0d18a9dd645248f>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=step: next over function call
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
============================
sergiodj+
2015-04-24 01:41:59 UTC
Permalink
Buildslave:
fedora-x86-64-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m64/builds/937>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-m64/.git/tree/?h=master&id=9d0aae02c8ceb2151d67b818118e9d2e23136c9e>

*** Regressions found ***
============================
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/gdb-sigterm.exp: expect eof #0 (stepping inside range 201 times)
FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================
sergiodj+
2015-04-24 01:46:07 UTC
Permalink
Buildslave:
wildebeest-debian-wheezy-x86_64

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-x86_64-m64/builds/891>

Commit(s) tested:
3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5

Author(s) (in the same order as the commits):
H.J. Lu <***@gmail.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
<Error fetching commit ID for 3e19fb8f990e4ce8a08f9cf2817cd9e9398648d5>
Continue reading on narkive:
Loading...