Discussion:
[binutils-gdb] Merge async and sync code paths some more
(too old to reply)
sergiodj+
2015-09-09 17:41:07 UTC
Permalink
*** TEST RESULTS FOR COMMIT 0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25 ***

Author: Pedro Alves <***@redhat.com>
Branch: master
Commit: 0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Merge async and sync code paths some more

This patch makes the execution control code use largely the same
mechanisms in both sync- and async-capable targets. This means using
continuations and use the event loop to react to target events on sync
targets as well. The trick is to immediately mark infrun's event loop
source after resume instead of calling wait_for_inferior. Then
fetch_inferior_event is adjusted to do a blocking wait on sync
targets.

Tested on x86_64 Fedora 20, native and gdbserver, with and without
"maint set target-async off".

gdb/ChangeLog:
2015-09-09 Pedro Alves <***@redhat.com>

* breakpoint.c (bpstat_do_actions_1, until_break_command): Don't
check whether the target can async.
* inf-loop.c (inferior_event_handler): Only call target_async if
the target can async.
* infcall.c: Include top.h and interps.h.
(run_inferior_call): For the interpreter to sync mode while
running the infcall. Call wait_sync_command_done instead of
wait_for_inferior plus normal_stop.
* infcmd.c (prepare_execution_command): Don't check whether the
target can async when running in the foreground.
(step_1): Delete synchronous case handling.
(step_once): Always install a continuation, even in sync mode.
(until_next_command, finish_forward): Don't check whether the
target can async.
(attach_command_post_wait, notice_new_inferior): Always install a
continuation, even in sync mode.
* infrun.c (mark_infrun_async_event_handler): New function.
(proceed): In sync mode, mark infrun's event source instead of
waiting for events here.
(fetch_inferior_event): If the target can't async, do a blocking
wait.
(prepare_to_wait): In sync mode, mark infrun's event source.
(infrun_async_inferior_event_handler): No longer bail out if the
target can't async.
* infrun.h (mark_infrun_async_event_handler): New declaration.
* linux-nat.c (linux_nat_wait_1): Remove calls to
set_sigint_trap/clear_sigint_trap.
(linux_nat_terminal_inferior): No longer check whether the target
can async.
* mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify
comment.
(mi_execute_command_input_handler): No longer check whether the
target is async. Update and simplify comment.
* target.c (default_target_wait): New function.
* target.h (struct target_ops) <to_wait>: Now defaults to
default_target_wait.
(default_target_wait): Declare.
* top.c (wait_sync_command_done): New function, factored out from
...
(maybe_wait_sync_command_done): ... this.
* top.h (wait_sync_command_done): Declare.
* target-delegates.c: Regenerate.
sergiodj+
2015-09-09 17:41:07 UTC
Permalink
Buildslave:
debian-wheezy-s390x-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/612>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Debian-s390x-native-gdbserver-m64/.git/tree/?h=master&id=0f75161f55223e5140ef80e61568a081c6950c7a>

*** Regressions found ***
============================
new FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/s390-multiarch.exp: compile (31)
new FAIL: gdb.base/call-sc.exp: value foo returned; return call-sc-tld
new FAIL: gdb.base/commands.exp: continue with watch
new FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/dfp-test.exp: Correct _Decimal128 return value from called function.
new FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp
new FAIL: gdb.base/display.exp: next hit
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/longjmp.exp: next over longjmp(1)
new FAIL: gdb.base/longjmp.exp: next over call_longjmp (2)
new FAIL: gdb.base/pr11022.exp: breakpoint hit
new FAIL: gdb.base/pr11022.exp: watchpoint hit
new FAIL: gdb.base/pr11022.exp: breakpoint hit 2
new FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
new FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
new FAIL: gdb.base/recurse.exp: next over b = 0 in second instance
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
new FAIL: gdb.base/value-double-free.exp: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: continue until exit
new FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
new FAIL: gdb.base/watchpoint-solib.exp: continue to foo again
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint at func1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
new FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: back at main from marker1
new FAIL: gdb.base/watchpoint.exp: next to `for' in watchpoint.exp
new FAIL: gdb.base/watchpoint.exp: until to ival1 assignment
new FAIL: gdb.base/watchpoint.exp: until to ival3 assignment
new FAIL: gdb.base/watchpoint.exp: until out of loop
new FAIL: gdb.base/watchpoint.exp: step to ival2 assignment
new FAIL: gdb.base/watchpoint.exp: Test complex watchpoint
new FAIL: gdb.base/watchpoint.exp: did not trigger wrong watchpoint
new FAIL: gdb.base/watchpoint.exp: trigger local watch
new FAIL: gdb.base/watchpoint.exp: self-delete local watch
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here <<2>>
new FAIL: gdb.base/watchpoint.exp: trigger1 partially local watch
new FAIL: gdb.base/watchpoint.exp: trigger2 partially local watch
new FAIL: gdb.base/watchpoint.exp: self-delete partially local watch
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here <<3>>
new FAIL: gdb.base/watchpoint.exp: trigger static local watch
new FAIL: gdb.base/watchpoint.exp: continue after trigger static local watch
new FAIL: gdb.base/watchpoint.exp: cont
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: cont <<2>>
new FAIL: gdb.base/watchpoint.exp: cont <<3>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization <<2>>
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program exited)
new FAIL: gdb.base/watchpoint.exp: global_ptr next
new FAIL: gdb.base/watchpoint.exp: next over ptr init
new FAIL: gdb.base/watchpoint.exp: next over buffer set
new FAIL: gdb.base/watchpoint.exp: global_ptr_ptr next
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr init
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr buffer set
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr pointer advance
new FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 5
new FAIL: gdb.cp/exceptprint.exp: string: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: reference to struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at throw <<2>>
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch <<2>>
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
new FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.dwarf2/dw2-anon-mptr.exp: ptype crash
new FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
new FAIL: gdb.dwarf2/member-ptr-forwardref.exp: ptype c
new FAIL: gdb.linespec/explicit.exp: complete unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-existant function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete unique file name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique file name (timeout)
new FAIL: gdb.mi/mi-async.exp: start: send (MI error)
new FAIL: gdb.mi/mi-async.exp: start: stop (timeout)
new FAIL: gdb.mi/mi-async.exp: CLI next: send (MI error)
new FAIL: gdb.mi/mi-async.exp: CLI next: stop (timeout)
new FAIL: gdb.mi/mi-async.exp: restart: send (MI error)
new FAIL: gdb.mi/mi-async.exp: restart: stop (timeout)
new FAIL: gdb.mi/mi-detach.exp: detach
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent (timeout)
new FAIL: gdb.mi/mi-watch-nonstop.exp: resume 1 (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (timeout)
new FAIL: gdb.modula2/unbounded-array.exp: print unbounded array contents
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.python/py-value-cc.exp: u's second field via field
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test2 forced_stabs
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test forced_stabs
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint triggers
new FAIL: gdb.threads/local-watch-wrong-thread.exp: the other thread stopped on breakpoint
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint still triggers
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint automatically deleted
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchthreads.exp: threaded watch loop
new FAIL: gdb.threads/watchthreads.exp: first watchpoint on args[0] hit
new FAIL: gdb.threads/watchthreads.exp: first watchpoint on args[1] hit
new FAIL: gdb.threads/watchthreads.exp: watchpoint on args[0] hit in thread
new FAIL: gdb.threads/watchthreads.exp: watchpoint on args[1] hit in thread
new FAIL: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
new FAIL: gdb.threads/wp-replication.exp: No hardware watchpoints available
new FAIL: gdb.trace/tfile.exp: tfind 0 on trace file
============================
sergiodj+
2015-09-09 17:41:25 UTC
Permalink
Buildslave:
rhel-7.1-s390x-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/RHEL-s390x-m64/builds/163>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/RHEL-s390x-m64/.git/tree/?h=master&id=b93e5f84ebe80380b868b3054c1e2d1cc187836f>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: find current thread (after)
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next does not change thread (switched to thread )
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: current thread advanced - unlocked (wrong amount)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: find current thread (after)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: find current thread (after)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: print call_function = 1
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: find current thread (after)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: find current thread (after)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: find current thread (after)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: print call_function = 1
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: find current thread (after)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.base/siginfo-obj.exp: Extract si_errno
PASS -> FAIL: gdb.python/python.exp: set the hook to default <<2>>
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: find current thread (after)
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next does not change thread (switched to thread )
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: current thread advanced - unlocked (wrong amount)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: find current thread (after)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: find current thread (after)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: print call_function = 1
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: find current thread (after)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: find current thread (after)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: find current thread (after)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: continue to breakpoint: return to loop (the program is no longer running)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: find current thread (before)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: print call_function = 1
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (0)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (1)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (2)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (3)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (4)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (5)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (6)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (7)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (8)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment (9)
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: find current thread (after)
============================
sergiodj+
2015-09-09 17:44:37 UTC
Permalink
Buildslave:
fedora-x86-64-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/1921>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-i686/.git/tree/?h=master&id=5db61ea08ae0c2ac2d5a43e052b7f79b3aba317f>

*** Regressions found ***
============================
new FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited)
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited)
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/interface.exp: print s
FAIL: gdb.ada/iwide.exp: print My_Drawable
FAIL: gdb.ada/iwide.exp: print d_access.all
FAIL: gdb.ada/iwide.exp: print dp_access.all
FAIL: gdb.ada/iwide.exp: print s_access.all
FAIL: gdb.ada/iwide.exp: print sp_access.all
FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
FAIL: gdb.ada/mi_interface.exp: list ggg1's children
FAIL: gdb.ada/ptype_tagged_param.exp: ptype s
FAIL: gdb.ada/str_uninit.exp: print my_str
FAIL: gdb.ada/tagged.exp: print obj
FAIL: gdb.ada/tagged.exp: ptype obj
FAIL: gdb.ada/tagged_access.exp: ptype c.all
FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (GDB internal error)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (GDB internal error)
FAIL: gdb.base/auxv.exp: continue (timeout)
FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================
sergiodj+
2015-09-09 17:48:46 UTC
Permalink
Buildslave:
debian-wheezy-s390x-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-s390x-m64/builds/613>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Debian-s390x-m64/.git/tree/?h=master&id=ced7e69a8c05f3c4af97e132fec8e5d3d59a0a21>

*** Regressions found ***
============================
new FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step (pattern 3)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/s390-multiarch.exp: compile (31)
new FAIL: gdb.base/call-sc.exp: value foo returned; return call-sc-tld
new FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/dfp-test.exp: Correct _Decimal128 return value from called function.
new FAIL: gdb.base/longjmp.exp: next over longjmp(1)
new FAIL: gdb.base/longjmp.exp: next over call_longjmp (2)
new FAIL: gdb.cp/annota2.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota2.exp: annotate-quit
new FAIL: gdb.cp/exceptprint.exp: string: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: reference to struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at throw <<2>>
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch <<2>>
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
new FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.dwarf2/dw2-anon-mptr.exp: ptype crash
new FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
new FAIL: gdb.dwarf2/member-ptr-forwardref.exp: ptype c
new FAIL: gdb.linespec/explicit.exp: complete unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-existant function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete unique file name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique file name (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.modula2/unbounded-array.exp: print unbounded array contents
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.python/py-value-cc.exp: u's second field via field
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test2 forced_stabs
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test forced_stabs
new FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step (pattern 3)
PASS -> FAIL: gdb.threads/watchthreads.exp: threaded watch loop
PASS -> FAIL: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
new FAIL: gdb.trace/tfile.exp: tfind 0 on trace file
============================
sergiodj+
2015-09-09 17:49:10 UTC
Permalink
Buildslave:
fedora-x86-64-4

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/1906>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m32/.git/tree/?h=master&id=2ea6a9385ccde2a917c9242e6123bda43e5ebe13>

*** Regressions found ***
============================
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.base/interrupt.exp: echo data (timeout)
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/win_fu_syms.exp: compilation foo.adb
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one (the program exited)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: Check inferior list
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.base/interrupt.exp: echo data (timeout)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.base/interrupt.exp: echo more data (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.trace/collection.exp: collect register locals collectively: collected local char
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: tfile: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/arraydim.exp: print m'first
FAIL: gdb.ada/arraydim.exp: print m'first(1)
FAIL: gdb.ada/arraydim.exp: print m'first(2)
FAIL: gdb.ada/arraydim.exp: print m'first(3)
FAIL: gdb.ada/arraydim.exp: print m'last
FAIL: gdb.ada/arraydim.exp: print m'last(1)
FAIL: gdb.ada/arraydim.exp: print m'last(2)
FAIL: gdb.ada/arraydim.exp: print m'last(3)
FAIL: gdb.ada/arraydim.exp: print m'length
FAIL: gdb.ada/arraydim.exp: print m'length(1)
FAIL: gdb.ada/arraydim.exp: print m'length(2)
FAIL: gdb.ada/arraydim.exp: print m'length(3)
FAIL: gdb.ada/arrayidx.exp: print e_one_two_three
FAIL: gdb.ada/arrayidx.exp: print e_one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print empty
FAIL: gdb.ada/arrayidx.exp: print empty, indexes off
FAIL: gdb.ada/arrayidx.exp: print few_reps
FAIL: gdb.ada/arrayidx.exp: print few_reps, indexes off
FAIL: gdb.ada/arrayidx.exp: print many_reps
FAIL: gdb.ada/arrayidx.exp: print many_reps, indexes off
FAIL: gdb.ada/arrayidx.exp: print one_two_three
FAIL: gdb.ada/arrayidx.exp: print one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print p_one_two_three
FAIL: gdb.ada/arrayidx.exp: print p_one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print r_two_three
FAIL: gdb.ada/arrayidx.exp: print r_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print u_one_two_three
FAIL: gdb.ada/arrayidx.exp: print u_one_two_three, indexes off
FAIL: gdb.ada/arrayparam.exp: print first after function call
FAIL: gdb.ada/arrayparam.exp: print last after function call
FAIL: gdb.ada/arrayparam.exp: print length after function call
FAIL: gdb.ada/bp_enum_homonym.exp: run to pck.archive breakpoint
FAIL: gdb.ada/bp_range_type.exp: print small_value
FAIL: gdb.ada/bp_range_type.exp: run to breakpoint
FAIL: gdb.ada/char_param.exp: call next
FAIL: gdb.ada/char_param.exp: print procedure_result after calling next
FAIL: gdb.ada/char_param.exp: print procedure_result after calling same
FAIL: gdb.ada/complete.exp: complete p external_ident
FAIL: gdb.ada/complete.exp: complete p some
FAIL: gdb.ada/complete.exp: interactive complete 'print some' (timeout)
FAIL: gdb.ada/cond_lang.exp: continue (the program is no longer running)
FAIL: gdb.ada/dyn_arrayidx.exp: ptype array_type
FAIL: gdb.ada/enum_idx_packed.exp: print full'first
FAIL: gdb.ada/expr_delims.exp: Check that watchpoint is set correctly.
FAIL: gdb.ada/expr_delims.exp: Print variable 'thread'
FAIL: gdb.ada/expr_delims.exp: Set conditional watchpoint.
FAIL: gdb.ada/expr_delims.exp: Set plain watchpoint on variable 'thread'
FAIL: gdb.ada/expr_delims.exp: continue (the program is no longer running)
FAIL: gdb.ada/exprs.exp: long_float'max
FAIL: gdb.ada/exprs.exp: long_float'min
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 10
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 20
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 20.0
FAIL: gdb.ada/fixed_points.exp: p on a new fixed point type
FAIL: gdb.ada/fixed_points.exp: p on a subtype fixed point type
FAIL: gdb.ada/fixed_points.exp: print Overprecise_Object
FAIL: gdb.ada/fixed_points.exp: ptype Overprecise_Object
FAIL: gdb.ada/float_param.exp: call set_double(1, 3.0)
FAIL: gdb.ada/float_param.exp: call set_long_double(1, global_small_struct, 4.0)
FAIL: gdb.ada/float_param.exp: print global_double
FAIL: gdb.ada/float_param.exp: print global_float
FAIL: gdb.ada/float_param.exp: print global_long_double
FAIL: gdb.ada/formatted_ref.exp: print s.x = 13
FAIL: gdb.ada/formatted_ref.exp: print/x s'access
FAIL: gdb.ada/homonym.exp: continue until BREAK_2 (the program is no longer running)
FAIL: gdb.ada/homonym.exp: print lcl at BREAK_1
FAIL: gdb.ada/homonym.exp: print lcl at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype int_type at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype lcl at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype lcl at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype local_type at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype local_type at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_2
FAIL: gdb.ada/interface.exp: print s
FAIL: gdb.ada/iwide.exp: print d_access.all
FAIL: gdb.ada/iwide.exp: print dp_access.all
FAIL: gdb.ada/iwide.exp: print s_access.all
FAIL: gdb.ada/iwide.exp: print sp_access.all
FAIL: gdb.ada/lang_switch.exp: backtrace
FAIL: gdb.ada/lang_switch.exp: backtrace with lang set to C
FAIL: gdb.ada/mi_dyn_arr.exp: Create bt varobj
FAIL: gdb.ada/mi_dyn_arr.exp: run to foo.adb:22 (exec-continue) (MI error)
FAIL: gdb.ada/mi_dyn_arr.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions const.aint
FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions task
FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
FAIL: gdb.ada/mi_interface.exp: list ggg1's children
FAIL: gdb.ada/mi_interface.exp: run to foo.adb:22 (exec-continue) (MI error)
FAIL: gdb.ada/mi_interface.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.ada/mi_task_info.exp: -ada-task-info 3
FAIL: gdb.ada/null_array.exp: print my_matrix
FAIL: gdb.ada/null_array.exp: ptype my_table
FAIL: gdb.ada/operator_bp.exp: continue to "&" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "*" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "**" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "+" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "-" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "/" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "<" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "<=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ">" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ">=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "abs" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "and" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "mod" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "not" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "or" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "rem" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "xor" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."&" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."*" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."**" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."+" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."-" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."/" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."<" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."<=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops.">" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops.">=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."abs" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."and" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."mod" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."not" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."or" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."rem" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."xor" (the program is no longer running)
FAIL: gdb.ada/packed_array.exp: print &var
FAIL: gdb.ada/packed_array.exp: print u_var
FAIL: gdb.ada/packed_array.exp: ptype &var
FAIL: gdb.ada/packed_tagged.exp: ptype x
FAIL: gdb.ada/pkd_arr_elem.exp: print test.str
FAIL: gdb.ada/pkd_arr_elem.exp: print test.str(1)
FAIL: gdb.ada/pp-rec-component.exp: print /r before
FAIL: gdb.ada/pp-rec-component.exp: print before
FAIL: gdb.ada/print_chars.exp: print WC
FAIL: gdb.ada/print_chars.exp: print WWC
FAIL: gdb.ada/py_range.exp: python print(int(gdb.parse_and_eval('ir')))
FAIL: gdb.ada/py_range.exp: python print(int(gdb.parse_and_eval('si')))
FAIL: gdb.ada/rdv_wait.exp: task 2
FAIL: gdb.ada/set_pckd_arr_elt.exp: continue to update_small (the program is no longer running)
FAIL: gdb.ada/tagged.exp: print obj
FAIL: gdb.ada/tagged.exp: print segm
FAIL: gdb.ada/tagged.exp: ptype obj
FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
FAIL: gdb.ada/task_bp.exp: run to dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:pck.dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:pck.dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.dummy_task - from psymtab
FAIL: gdb.ada/tasks.exp: break break_me task 1
FAIL: gdb.ada/tasks.exp: break break_me task 3
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print cold'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print prim'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print vars'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype cold'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype full'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype prim'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype vars'length
FAIL: gdb.ada/type_coercion.exp: p q
FAIL: gdb.ada/type_coercion.exp: print {Integer} $addr
FAIL: gdb.ada/type_coercion.exp: save q'address in convenience variable
FAIL: gdb.ada/type_coercion.exp: set {Integer} $addr := 19
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: continue to STOP2 (the program is no longer running)
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_Object.Ptr when null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when no longer null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when no longer null <<2>>
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_object after setting Ptr
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_object.ptr.all
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_p_object after setting Ptr
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_p_object.ptr.all
FAIL: gdb.ada/var_arr_attrs.exp: print my_object.data'last
FAIL: gdb.ada/var_arr_attrs.exp: print my_object.data'length
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'first
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'last
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'length
FAIL: gdb.ada/variant_record_packed_array.exp: print address
FAIL: gdb.ada/variant_record_packed_array.exp: print adress content
FAIL: gdb.ada/watch_arg.exp: Continuing to second breakpoint (the program is no longer running)
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object with null Ptr
FAIL: gdb.ada/mi_var_array.exp: Create bt varobj
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.ada/mi_var_array.exp: run to bar.adb:28 (exec-continue) (MI error)
FAIL: gdb.ada/mi_var_array.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5
FAIL: gdb.threads/print-threads.exp: all threads ran once (fast) (total 4 threads ran)
FAIL: gdb.threads/print-threads.exp: all threads ran once (slow with kill breakpoint) (total 4 threads ran)
FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2
FAIL: gdb.threads/print-threads.exp: all threads ran once
FAIL: gdb.threads/print-threads.exp: all threads ran once (slow) (total 4 threads ran)
FAIL: gdb.threads/watchthreads2.exp: all threads started
FAIL: gdb.threads/watchthreads2.exp: run to thread_started
============================
sergiodj+
2015-09-09 17:58:11 UTC
Permalink
Buildslave:
debian-wheezy-s390x-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-extended-gdbserver-m64/builds/610>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Debian-s390x-native-extended-gdbserver-m64/.git/tree/?h=master&id=6280abf91c62a5138d231d743def5b28d2e874c2>

*** Regressions found ***
============================
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi set dprintf style to an unrecognized type (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (MI error)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/s390-multiarch.exp: compile (31)
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/async-shell.exp: run &
new FAIL: gdb.base/async-shell.exp: interrupt
new FAIL: gdb.base/async-shell.exp: process stopped (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: symbol-less: ld.so exit
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: symbol-less: seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/call-sc.exp: value foo returned; return call-sc-tld
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called close (the program exited)
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall close has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called chroot (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall chroot has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called pipe (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall pipe has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called write (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall write has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called read (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall read has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called exit_group (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: continue until exit (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with arguments: program has called close (the program exited)
new FAIL: gdb.base/catch-syscall.exp: with arguments: syscall close has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with arguments: continue until exit (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called close (the program exited)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall close has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called chroot (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall chroot has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called pipe (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall pipe has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called write (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall write has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called read (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall read has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: continue until exit (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: wrong args: continue until exit at catch syscall with unused syscall (mlock) (the program exited)
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry: program has called chroot (the program exited)
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: program has called chroot (the program exited)
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: syscall chroot has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: continue until exit (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: close: program has called 6 (the program exited)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: close: syscall 6 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: chroot: program has called 61 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: chroot: syscall 61 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: pipe: program has called 42 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: pipe: syscall 42 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: write: program has called 4 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: write: syscall 4 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: read: program has called 3 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: read: syscall 3 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: program has called 248 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 6 (the program exited)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 6 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 61 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 61 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 42 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 42 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 4 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 4 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 3 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 3 has returned (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one (the program exited)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/checkpoint.exp: info checkpoints one
new FAIL: gdb.base/checkpoint.exp: restart 1 one
new FAIL: gdb.base/checkpoint.exp: verify i 1 one
new FAIL: gdb.base/checkpoint.exp: step in 1 one
new FAIL: gdb.base/checkpoint.exp: restart 2 one
new FAIL: gdb.base/checkpoint.exp: step in 2 one
new FAIL: gdb.base/checkpoint.exp: verify i 2 one
new FAIL: gdb.base/checkpoint.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint.exp: restart 3 one
new FAIL: gdb.base/checkpoint.exp: step in 3 one
new FAIL: gdb.base/checkpoint.exp: verify i 3 one
new FAIL: gdb.base/checkpoint.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint.exp: restart 4 one
new FAIL: gdb.base/checkpoint.exp: step in 4 one
new FAIL: gdb.base/checkpoint.exp: verify i 4 one
new FAIL: gdb.base/checkpoint.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint.exp: restart 5 one
new FAIL: gdb.base/checkpoint.exp: step in 5 one
new FAIL: gdb.base/checkpoint.exp: verify i 5 one
new FAIL: gdb.base/checkpoint.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint.exp: restart 6 one
new FAIL: gdb.base/checkpoint.exp: step in 6 one
new FAIL: gdb.base/checkpoint.exp: verify i 6 one
new FAIL: gdb.base/checkpoint.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint.exp: restart 7 one
new FAIL: gdb.base/checkpoint.exp: step in 7 one
new FAIL: gdb.base/checkpoint.exp: verify i 7 one
new FAIL: gdb.base/checkpoint.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint.exp: restart 8 one
new FAIL: gdb.base/checkpoint.exp: step in 8 one (the program exited)
new FAIL: gdb.base/checkpoint.exp: verify i 8 one
new FAIL: gdb.base/checkpoint.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint.exp: restart 9 one
new FAIL: gdb.base/checkpoint.exp: step in 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify i 9 one
new FAIL: gdb.base/checkpoint.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint.exp: restart 10 one
new FAIL: gdb.base/checkpoint.exp: step in 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify i 10 one
new FAIL: gdb.base/checkpoint.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint.exp: restart 0 one
new FAIL: gdb.base/checkpoint.exp: break3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: Diff input and output one
new FAIL: gdb.base/checkpoint.exp: restart 1 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 1 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint.exp: restart 2 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint.exp: restart 3 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint.exp: restart 4 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint.exp: restart 5 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint.exp: restart 6 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint.exp: restart 7 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint.exp: Diff input and output two
new FAIL: gdb.base/checkpoint.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: restart 1 three
new FAIL: gdb.base/checkpoint.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 1
new FAIL: gdb.base/checkpoint.exp: restart 2 three
new FAIL: gdb.base/checkpoint.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 2
new FAIL: gdb.base/checkpoint.exp: restart 3 three
new FAIL: gdb.base/checkpoint.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 3
new FAIL: gdb.base/checkpoint.exp: restart 4 three
new FAIL: gdb.base/checkpoint.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 4
new FAIL: gdb.base/checkpoint.exp: restart 5 three
new FAIL: gdb.base/checkpoint.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 5
new FAIL: gdb.base/checkpoint.exp: restart 6 three
new FAIL: gdb.base/checkpoint.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 6
new FAIL: gdb.base/checkpoint.exp: restart 7 three
new FAIL: gdb.base/checkpoint.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 7
new FAIL: gdb.base/checkpoint.exp: restart 8 three
new FAIL: gdb.base/checkpoint.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 8
new FAIL: gdb.base/checkpoint.exp: restart 9 three
new FAIL: gdb.base/checkpoint.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 9
new FAIL: gdb.base/checkpoint.exp: restart 10 three
new FAIL: gdb.base/checkpoint.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 10
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: info checkpoints two
new FAIL: gdb.base/checkpoint.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/commands.exp: continue with watch
new FAIL: gdb.base/corefile.exp: run: with core
new FAIL: gdb.base/corefile.exp: run: core file is cleared
new FAIL: gdb.base/corefile.exp: attach: with core
new FAIL: gdb.base/corefile.exp: attach: core file is cleared
new FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/dfp-test.exp: Correct _Decimal128 return value from called function.
new FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp
new FAIL: gdb.base/display.exp: next hit
new FAIL: gdb.base/dprintf-non-stop.exp: Can't run to main
new FAIL: gdb.base/execl-update-breakpoints.exp: always-inserted off: continue across exec
new FAIL: gdb.base/execl-update-breakpoints.exp: always-inserted on: continue across exec
new FAIL: gdb.base/find-unmapped.exp: find global_var_0, global_var_2, 0xff
new FAIL: gdb.base/find-unmapped.exp: find global_var_1, global_var_2, 0xff
new FAIL: gdb.base/find-unmapped.exp: find global_var_2, (global_var_2 + 16), 0xff
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: Check inferior list
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/longjmp.exp: next over longjmp(1)
new FAIL: gdb.base/longjmp.exp: next over call_longjmp (2)
new FAIL: gdb.base/pie-execl.exp: continue
new FAIL: gdb.base/pie-execl.exp: pie_execl_marker address has changed
new FAIL: gdb.base/pr11022.exp: breakpoint hit
new FAIL: gdb.base/pr11022.exp: watchpoint hit
new FAIL: gdb.base/pr11022.exp: breakpoint hit 2
new FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
new FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
new FAIL: gdb.base/recurse.exp: next over b = 0 in second instance
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
new FAIL: gdb.base/solib-nodir.exp: library loaded
new FAIL: gdb.base/term.exp: info terminal at breakpoint
new FAIL: gdb.base/testenv.exp: Test no TEST_GDB var
new FAIL: gdb.base/testenv.exp: Test with one TEST_GDB var
new FAIL: gdb.base/testenv.exp: Test with two TEST_GDB var
new FAIL: gdb.base/testenv.exp: Test with one TEST_GDB var, after unset
new FAIL: gdb.base/testenv.exp: Test with TEST_GDB_GLOBAL
new FAIL: gdb.base/testenv.exp: Test with TEST_GDB_GLOBAL unset
new FAIL: gdb.base/value-double-free.exp: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: continue until exit
new FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw)
new FAIL: gdb.base/watchpoint-hw.exp: start
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
new FAIL: gdb.base/watchpoint-solib.exp: continue to foo again
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint at func1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
new FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: back at main from marker1
new FAIL: gdb.base/watchpoint.exp: next to `for' in watchpoint.exp
new FAIL: gdb.base/watchpoint.exp: until to ival1 assignment
new FAIL: gdb.base/watchpoint.exp: until to ival3 assignment
new FAIL: gdb.base/watchpoint.exp: until out of loop
new FAIL: gdb.base/watchpoint.exp: step to ival2 assignment
new FAIL: gdb.base/watchpoint.exp: Test complex watchpoint
new FAIL: gdb.base/watchpoint.exp: did not trigger wrong watchpoint
new FAIL: gdb.base/watchpoint.exp: trigger local watch
new FAIL: gdb.base/watchpoint.exp: self-delete local watch
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here <<2>>
new FAIL: gdb.base/watchpoint.exp: trigger1 partially local watch
new FAIL: gdb.base/watchpoint.exp: trigger2 partially local watch
new FAIL: gdb.base/watchpoint.exp: self-delete partially local watch
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here <<3>>
new FAIL: gdb.base/watchpoint.exp: trigger static local watch
new FAIL: gdb.base/watchpoint.exp: continue after trigger static local watch
new FAIL: gdb.base/watchpoint.exp: cont
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: cont <<2>>
new FAIL: gdb.base/watchpoint.exp: cont <<3>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization <<2>>
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program exited)
new FAIL: gdb.base/watchpoint.exp: global_ptr next
new FAIL: gdb.base/watchpoint.exp: next over ptr init
new FAIL: gdb.base/watchpoint.exp: next over buffer set
new FAIL: gdb.base/watchpoint.exp: global_ptr_ptr next
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr init
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr buffer set
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr pointer advance
new FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 5
new FAIL: gdb.cp/annota2.exp: continue until exit (timeout)
new FAIL: gdb.cp/annota2.exp: delete bps
new FAIL: gdb.cp/annota2.exp: break at main (got interactive prompt)
new FAIL: gdb.cp/annota2.exp: set watch on a.x (timeout)
new FAIL: gdb.cp/annota2.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota2.exp: annotate-quit
new FAIL: gdb.cp/annota3.exp: continue to exit (pattern 4)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 2)
new FAIL: gdb.cp/exceptprint.exp: string: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: reference to struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at throw <<2>>
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch <<2>>
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
new FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.dwarf2/dw2-anon-mptr.exp: ptype crash
new FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
new FAIL: gdb.dwarf2/member-ptr-forwardref.exp: ptype c
new FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.linespec/explicit.exp: complete unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-existant function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete unique file name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique file name (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (unknown output after running)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi set dprintf style to an unrecognized type (timeout)
new FAIL: gdb.mi/mi-pending.exp: MI pending breakpoint on mi-pendshr.c:pendfunc2 if x==4
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.modula2/unbounded-array.exp: print unbounded array contents
new FAIL: gdb.multi/bkpt-multi-exec.exp: continue
new FAIL: gdb.multi/bkpt-multi-exec.exp: run
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
new FAIL: gdb.python/py-events.exp: get current thread
new FAIL: gdb.python/py-evsignal.exp: Signal Thread 3
new FAIL: gdb.python/py-evthreads.exp: Run to breakpoint 1
new FAIL: gdb.python/py-evthreads.exp: reached breakpoint 2
new FAIL: gdb.python/py-evthreads.exp: thread 2
new FAIL: gdb.python/py-evthreads.exp: reached breakpoint 3
new FAIL: gdb.python/py-evthreads.exp: thread 3
new FAIL: gdb.python/py-evthreads.exp: continue thread 1
new FAIL: gdb.python/py-evthreads.exp: thread 3 was signaled (timeout)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.python/py-value-cc.exp: u's second field via field
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test2 forced_stabs
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test forced_stabs
new FAIL: gdb.threads/execl.exp: continue across exec
new FAIL: gdb.threads/execl.exp: continue until exit (the program exited)
new FAIL: gdb.threads/linux-dp.exp: info threads after: 0
new FAIL: gdb.threads/linux-dp.exp: info threads after: 1
new FAIL: gdb.threads/linux-dp.exp: info threads after: 2
new FAIL: gdb.threads/linux-dp.exp: info threads after: 3
new FAIL: gdb.threads/linux-dp.exp: info threads after: 4
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint triggers
new FAIL: gdb.threads/local-watch-wrong-thread.exp: the other thread stopped on breakpoint
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint still triggers
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint automatically deleted
new FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when thread 2 exits
new FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when the main thread exits
new FAIL: gdb.threads/non-ldr-exc-1.exp: lock-sched0: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-1.exp: lock-sched1: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched0: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched1: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched0: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched1: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-4.exp: lock-sched0: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-4.exp: lock-sched1: continue over exec (timeout)
new FAIL: gdb.threads/staticthreads.exp: tlsvar in thread
new FAIL: gdb.threads/staticthreads.exp: tlsvar in main
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/thread-execl.exp: schedlock off: get to main in new image (timeout)
new FAIL: gdb.threads/thread-execl.exp: schedlock step: get to main in new image (timeout)
new FAIL: gdb.threads/thread-execl.exp: schedlock on: get to main in new image (timeout)
new FAIL: gdb.threads/thread_events.exp: continue to after_join_func with messages enabled (saw 0, expected 1)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: hardware breakpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: hardware breakpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchthreads.exp: threaded watch loop
new FAIL: gdb.threads/watchthreads.exp: first watchpoint on args[0] hit
new FAIL: gdb.threads/watchthreads.exp: first watchpoint on args[1] hit
new FAIL: gdb.threads/watchthreads.exp: watchpoint on args[0] hit in thread
new FAIL: gdb.threads/watchthreads.exp: watchpoint on args[1] hit in thread
new FAIL: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
new FAIL: gdb.threads/wp-replication.exp: No hardware watchpoints available
new FAIL: gdb.trace/tfile.exp: tfind 0 on trace file
============================
sergiodj+
2015-09-09 18:00:14 UTC
Permalink
Buildslave:
fedora-x86-64-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m64/builds/1926>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m64/.git/tree/?h=master&id=3e030f3d784b2afe95136ae356234923a1c1552a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one (the program exited)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: Check inferior list
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=step: next over function call
============================
sergiodj+
2015-09-09 18:02:34 UTC
Permalink
Buildslave:
marist-fedora-s390x

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/1474>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-s390x-m64/.git/tree/?h=master&id=b8b281cbdc5c3086e2638ea5d09096f4e4ec8082>

*** Regressions found ***
============================
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.base/siginfo-thread.exp: Extract si_errno
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
PASS -> FAIL: gdb.threads/watchthreads.exp: threaded watch loop
PASS -> FAIL: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
PASS -> FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: tfind 0 again
PASS -> FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: -trace-find frame-number 0
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/async-shell.exp: process stopped (timeout)
============================
sergiodj+
2015-09-09 19:07:33 UTC
Permalink
Buildslave:
aix-power7-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/AIX-POWER7-plain/builds/643>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/AIX-POWER7-plain/.git/tree/?h=master&id=9cac7b4c252fa17d3300439fcba1ba9dc0d72336>

*** Regressions found ***
============================
new FAIL: gdb.cp/annota2.exp: watch triggered on a.x (timeout)
PASS -> FAIL: gdb.cp/annota2.exp: annotate-quit
new FAIL: gdb.mi/mi-dprintf.exp: fprintf: mi 1st dprintf stop (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: fprintf: mi 2nd dprintf stop (timeout)
PASS -> FAIL: gdb.mi/mi-logging.exp: Redirect log file contents
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: continue to tight loop (the program exited)
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: continue for ctrl-c (the program is no longer running)
new FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: second signal: signal command queries (the program exited)
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.base/attach.exp: starting with --pid
new FAIL: gdb.base/call-ar-st.exp: print print_double_array(double_array) (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_char_array(char_array) (timeout)
new FAIL: gdb.base/call-ar-st.exp: print sum_array_print(10, *list1, *list2, *list3, *list4) (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_small_structs (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_small_structs from print_long_arg_list (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_long_arg_list (timeout)
new FAIL: gdb.base/call-ar-st.exp: print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4) (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_struct_rep(*struct1, *struct2, *struct3) (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_one_large_struct(*list1) (timeout)
new FAIL: gdb.base/call-rt-st.exp: print print_one_double(*d1) <<2>>
new FAIL: gdb.base/catch-gdb-caused-signals.exp: continue (timeout)
new FAIL: gdb.base/completion.exp: tab complete break break.c:ma (timeout)
new FAIL: gdb.base/completion.exp: complete break break.c:ma
new FAIL: gdb.base/dprintf.exp: call: fprintf: 1st dprintf (timeout)
new FAIL: gdb.base/dprintf.exp: call: fprintf: 2nd dprintf (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: start (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: add inferior 3 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: inferior 3 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: attach to pid (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill inferiors 1 2 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: inferior 1 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: detach inferiors 3 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill inferiors 1 2 3 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: detach inferiors 1 2 3 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill inferiors 10 (timeout)
new FAIL: gdb.base/nested-subp1.exp: continue to the STOP marker
new FAIL: gdb.base/nested-subp1.exp: print i1
new FAIL: gdb.base/nested-subp2.exp: continue to the STOP marker
new FAIL: gdb.base/nested-subp2.exp: print count
new FAIL: gdb.base/nested-subp2.exp: continue to the STOP marker <<2>>
new FAIL: gdb.base/nested-subp2.exp: print count <<2>>
new FAIL: gdb.base/nested-subp3.exp: continue to the STOP marker
new FAIL: gdb.base/nested-subp3.exp: print first
new FAIL: gdb.cp/annota2.exp: watch triggered on a.x (timeout)
PASS -> FAIL: gdb.cp/annota2.exp: annotate-quit
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: print E2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: before start: c++: print S2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: before start: c++: print U2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype C
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c: print E2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: before start: c: print S2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: before start: c: print U2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype U2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: in main: c++: print E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: print S
new FAIL: gdb.cp/var-tag.exp: in main: c++: print U
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: print E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: print S2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: in main: c++: print U2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype C
new FAIL: gdb.cp/var-tag.exp: in main: c: print E
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c: print S
new FAIL: gdb.cp/var-tag.exp: in main: c: print U
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c: print E2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c: print S2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: in main: c: print U2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print S
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print U
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype C
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print E
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print S
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print U
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype U2
new FAIL: gdb.gdb/complaints.exp: call complaint (&symfile_complaints, "Register a complaint") (timeout)
new FAIL: gdb.gdb/complaints.exp: call complaint (&symfile_complaints, symfile_complaints->root->fmt) (timeout)
new FAIL: gdb.gdb/complaints.exp: call complaint (&symfile_complaints, "Testing! Testing! Testing!") (timeout)
new FAIL: gdb.gdb/complaints.exp: serial line 1 (timeout)
PASS -> FAIL: gdb.gdb/complaints.exp: empty non-verbose non-noisy clear
PASS -> FAIL: gdb.gdb/complaints.exp: empty verbose non-noisy clear
PASS -> FAIL: gdb.gdb/complaints.exp: empty verbose noisy clear
PASS -> FAIL: gdb.gdb/complaints.exp: empty non-verbose noisy clear
PASS -> FAIL: gdb.gdb/selftest.exp: backtrace through signal handler
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -function myclass::myfunction
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -source cpexplicit.cc -function myclass::myfunction -label top
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -function myclass::myfunction -label top (the program exited)
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -source cpexplicit.cc -function myclass::myfunction -label top -line 3
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -function myclass::myfunction -label top -line 3 (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -line 29 (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -function myclass::myfunction -label top
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -label top (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -line 3 (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -function myclass::myfunction -label top -line 3
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -label top -line 3 (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -line 3 (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::operator, (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function 'myclass::operator,' (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function "myclass::operator," (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: dprintf -function myclass::operator,,"hello"
new FAIL: gdb.linespec/cpexplicit.exp: dprintf -function 'myclass::operator,',"hello"
new FAIL: gdb.linespec/cpexplicit.exp: dprintf -function "myclass::operator,","hello"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -source explicit.c -function myfunction -label top thread 123
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top -line 3
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top -line 3"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top -line 3 if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top -line 3" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top -line 3" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -source explicit.c -function myfunction -label top -line 3 thread 123
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -function myfunction -label top thread 123
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top -line 3
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top -line 3"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top -line 3 if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top -line 3" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top -line 3" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -function myfunction -label top -line 3 thread 123
new FAIL: gdb.linespec/explicit.exp: complete unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-existant function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete unique file name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique file name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-existant file name (GDB internal error)
new FAIL: gdb.mi/mi-dprintf.exp: fprintf: mi 1st dprintf (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: fprintf: mi 2nd dprintf (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: fprintf: mi 2nd dprintf stop (timeout)
PASS -> FAIL: gdb.mi/mi-logging.exp: Redirect log file contents
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: infcall in inferior 1
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: two dummy frames
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: after infcall: bt in inferior 1
new FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: finish in inferior 2 (the program is no longer running)
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: after infcall: bt in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: before infcall: bt in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: infcall in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: before infcall: bt in inferior 1
new FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: finish in inferior 2 (the program is no longer running)
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 1
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=on: Can't run to main
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: Can't run to main
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: Can't run to main
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: Can't run to main
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: prepare to make hand call, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: prepare to make hand call, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: prepare to make hand call, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: prepare to make hand call, thread 5
PASS -> FAIL: gdb.threads/hand-call-new-thread.exp: iter 1: p new_thread ()
PASS -> FAIL: gdb.threads/kill.exp: threaded: all threads started
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 1
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 2
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 3
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 4
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 5
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 6
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 7
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 8
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 9
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 10
new FAIL: gdb.threads/non-ldr-exit.exp: set scheduler-locking on
new FAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: Can't run to main
new FAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: Can't run to main
new FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: second signal: signal command queries (the program exited)
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: get my_number
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
PASS -> FAIL: gdb.threads/stepi-random-signal.exp: continue to breakpoint: after pthread_kill
new FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit (the program is no longer running)
PASS -> FAIL: gdb.threads/tls.exp: continue to third thread
PASS -> FAIL: gdb.threads/tls.exp: third thread print me
PASS -> FAIL: gdb.threads/tls.exp: continue to synch point
new FAIL: gdb.threads/tls.exp: threads exited (the program exited)
============================
sergiodj+
2015-09-09 19:47:35 UTC
Permalink
Buildslave:
fedora-ppc64be-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-cc-with-index/builds/1852>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-cc-with-index/.git/tree/?h=master&id=1890d8880bbef04afb39458fc52695615164ada6>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints (timeout)
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
PASS -> FAIL: gdb.base/step-over-no-symbols.exp: displaced=auto: advanced
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints (timeout)
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (the program exited)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/auxv.exp: matching auxv data from live and gcore
============================
sergiodj+
2015-09-09 20:22:30 UTC
Permalink
Buildslave:
fedora-ppc64be-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-gdbserver-m64/builds/1852>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-native-gdbserver-m64/.git/tree/?h=master&id=9a0bf12d439707439c59ff5393fada64a7c63b5f>

*** Regressions found ***
============================
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/array_return.exp: value printed by finish of Create_Small
new FAIL: gdb.ada/array_return.exp: value printed by finish of Create_Large
new FAIL: gdb.ada/array_return.exp: value printed by finish of Create_Small_Float_Vector
new FAIL: gdb.ada/call_pn.exp: print pn (4321)
new FAIL: gdb.ada/call_pn.exp: print last_node_id after calling pn
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
new FAIL: gdb.ada/interface.exp: print s
new FAIL: gdb.ada/iwide.exp: print My_Drawable
new FAIL: gdb.ada/iwide.exp: print s_access.all
new FAIL: gdb.ada/iwide.exp: print sp_access.all
new FAIL: gdb.ada/iwide.exp: print d_access.all
new FAIL: gdb.ada/iwide.exp: print dp_access.all
new FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
new FAIL: gdb.ada/mi_interface.exp: list ggg1's children
new FAIL: gdb.ada/ptype_tagged_param.exp: ptype s
new FAIL: gdb.ada/ref_param.exp: frame argument value printed
new FAIL: gdb.ada/set_pckd_arr_elt.exp: continue to update_small
new FAIL: gdb.ada/tagged_access.exp: ptype c.all
new FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
new FAIL: gdb.ada/tagged.exp: ptype obj
new FAIL: gdb.ada/tagged.exp: print obj
new FAIL: gdb.ada/watch_arg.exp: Continuing to second breakpoint
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.base/callfuncs.exp: print *((int *(*) (void)) voidfunc)()
new FAIL: gdb.base/callfuncs.exp: noproto: print *((int *(*) (void)) voidfunc)()
new FAIL: gdb.base/commands.exp: continue with watch
new FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp
new FAIL: gdb.base/display.exp: next hit
new FAIL: gdb.base/func-ptrs.exp: continue to decr
new FAIL: gdb.base/func-ptrs.exp: stop in sentinel
new FAIL: gdb.base/func-ptrs.exp: move up to decr
new FAIL: gdb.base/func-ptrs.exp: go back to main from decr (the program is no longer running)
new FAIL: gdb.base/func-ptrs.exp: set calc to incr
new FAIL: gdb.base/func-ptrs.exp: continue to incr, second time (the program is no longer running)
new FAIL: gdb.base/func-ptrs.exp: go back to main from incr, second time (the program is no longer running)
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
new FAIL: gdb.base/gdbindex-stabs.exp: list stabs_function
new FAIL: gdb.base/gnu-debugdata.exp: have symtab
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.base/jit.exp: one_jit_test-1: info function ^jit_function
new FAIL: gdb.base/jit.exp: one_jit_test-2: info function ^jit_function
new FAIL: gdb.base/jit.exp: PIE: one_jit_test-1: info function ^jit_function
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 1
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2
new FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 1
new FAIL: gdb.base/jit-so.exp: one_jit_test-2: info function jit_function
new FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2
new FAIL: gdb.base/pc-fp.exp: info register pc fp
new FAIL: gdb.base/pr11022.exp: breakpoint hit
new FAIL: gdb.base/pr11022.exp: watchpoint hit
new FAIL: gdb.base/pr11022.exp: breakpoint hit 2
new FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
new FAIL: gdb.base/recurse.exp: next over b = 0 in second instance
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: bar (the program exited)
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: foo (the program is no longer running)
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: gdb_remove_symbol_file (the program is no longer running)
new FAIL: gdb.base/sym-file.exp: info files must not display sym-file-lib
new FAIL: gdb.base/sym-file.exp: breakpoint at foo is pending
new FAIL: gdb.base/sym-file.exp: breakpoint at bar is pending
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: reload (the program is no longer running)
new FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: gdb_add_symbol_file (the program is no longer running)
new FAIL: gdb.base/sym-file.exp: stale bkpts: add-symbol-file sym-file-lib.so addr
new FAIL: gdb.base/sym-file.exp: stale bkpts: breakpoint at baz is pending
new FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: end here (the program is no longer running)
new FAIL: gdb.base/until-nodebug.exp: until 1
new FAIL: gdb.base/until-nodebug.exp: until 2
new FAIL: gdb.base/value-double-free.exp: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: continue until exit
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
new FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint at func1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
new FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: back at main from marker1
new FAIL: gdb.base/watchpoint.exp: next to `for' in watchpoint.exp
new FAIL: gdb.base/watchpoint.exp: until to ival1 assignment
new FAIL: gdb.base/watchpoint.exp: until to ival3 assignment
new FAIL: gdb.base/watchpoint.exp: until out of loop
new FAIL: gdb.base/watchpoint.exp: step to ival2 assignment
new FAIL: gdb.base/watchpoint.exp: Test complex watchpoint
new FAIL: gdb.base/watchpoint.exp: did not trigger wrong watchpoint
new FAIL: gdb.base/watchpoint.exp: trigger local watch
new FAIL: gdb.base/watchpoint.exp: self-delete local watch
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here <<2>>
new FAIL: gdb.base/watchpoint.exp: trigger1 partially local watch
new FAIL: gdb.base/watchpoint.exp: trigger2 partially local watch
new FAIL: gdb.base/watchpoint.exp: self-delete partially local watch
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here <<3>>
new FAIL: gdb.base/watchpoint.exp: trigger static local watch
new FAIL: gdb.base/watchpoint.exp: continue after trigger static local watch
new FAIL: gdb.base/watchpoint.exp: cont
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: cont <<2>>
new FAIL: gdb.base/watchpoint.exp: cont <<3>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization <<2>>
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program exited)
new FAIL: gdb.base/watchpoint.exp: global_ptr next
new FAIL: gdb.base/watchpoint.exp: next over ptr init
new FAIL: gdb.base/watchpoint.exp: next over buffer set
new FAIL: gdb.base/watchpoint.exp: global_ptr_ptr next
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr init
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr buffer set
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr pointer advance
new FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
new FAIL: gdb.base/watchpoint-solib.exp: continue to foo again
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(i)
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(i) == &typeid(typeof(i))
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(cp)
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(cp) == &typeid(typeof(cp))
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(ccp)
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(ccp) == &typeid(typeof(ccp))
new FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/atomic-type.exp: ptype f
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g
new FAIL: gdb.dwarf2/dw2-case-insensitive.exp: p fuNC_symtab
new FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
new FAIL: gdb.mi/mi-async.exp: start: send (MI error)
new FAIL: gdb.mi/mi-async.exp: start: stop (timeout)
new FAIL: gdb.mi/mi-async.exp: CLI next: send (MI error)
new FAIL: gdb.mi/mi-async.exp: CLI next: stop (timeout)
new FAIL: gdb.mi/mi-async.exp: restart: send (MI error)
new FAIL: gdb.mi/mi-async.exp: restart: stop (timeout)
new FAIL: gdb.mi/mi-detach.exp: detach
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent (timeout)
new FAIL: gdb.mi/mi-var-child.exp: listing of children, simple types: names, type and values, complex types: names and types
new FAIL: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr_ptr in natural
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout) <<2>>
new FAIL: gdb.mi/mi-watch-nonstop.exp: resume 1 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.modula2/unbounded-array.exp: print unbounded array contents
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
new FAIL: gdb.python/py-framefilter.exp: bt for no debuginfo
new FAIL: gdb.python/py-framefilter.exp: bt full for no debuginfo
new FAIL: gdb.python/py-framefilter.exp: bt no filters for no debuginfo
new FAIL: gdb.python/py-framefilter.exp: bt no-filters full no debuginfo
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.python/py-objfile.exp: print main without debug info
new FAIL: gdb.python/python.exp: Test find_pc_line with resume address
new FAIL: gdb.python/py-value-cc.exp: u's second field via field
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.stabs/gdb11479.exp: Can't run to main forced_stabs
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
new FAIL: gdb.threads/wp-replication.exp: No hardware watchpoints available
new FAIL: gdb.trace/entry-values.exp: disassemble bar
new FAIL: gdb.trace/entry-values.exp: Find the call or branch instruction offset in bar
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.reverse/until-precsave.exp: advance to factorial (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: finish to main (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (the program is no longer running)
FAIL: gdb.base/func-ptrs.exp: move up to decr (timeout)
FAIL: gdb.base/func-ptrs.exp: stop in sentinel (timeout)
FAIL: gdb.reverse/until-precsave.exp: Kill process, prepare to debug log file (timeout)
FAIL: gdb.reverse/until-precsave.exp: advance to factorial
FAIL: gdb.reverse/until-precsave.exp: finish to main (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reload core file (timeout)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: run to end of main (timeout)
FAIL: gdb.reverse/until-precsave.exp: set reverse execution
FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: until line number (got interactive prompt)
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.reverse/until-precsave.exp: finish to main
============================
sergiodj+
2015-09-09 20:40:59 UTC
Permalink
Buildslave:
fedora-ppc64be-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-extended-gdbserver-m64/builds/1855>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-native-extended-gdbserver-m64/.git/tree/?h=master&id=5d6eaf04a563a5e8f609b802d4d4be05acfe14b9>

*** Regressions found ***
============================
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi set dprintf style to an unrecognized type (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (the program exited)
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one (the program exited)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: Check inferior list
PASS -> FAIL: gdb.base/gdbinit-history.exp: truncation: appending: server show commands
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.base/interrupt.exp: echo data (timeout)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.base/interrupt.exp: echo more data (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (unknown output after running)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (timeout)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (the program exited)
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/func-ptrs.exp: stop in sentinel (timeout)
FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (timeout)
FAIL: gdb.reverse/until-precsave.exp: finish to main (timeout)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: set reverse execution (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (timeout)
FAIL: gdb.reverse/until-precsave.exp: advance to marker2
FAIL: gdb.reverse/until-precsave.exp: finish to main
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: set reverse execution
FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (got interactive prompt)
FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
FAIL: gdb.gdb/selftest.exp: backtrace through signal handler (timeout)
FAIL: gdb.gdb/selftest.exp: send SIGINT signal to child process (timeout)
FAIL: gdb.base/func-ptrs.exp: stop in sentinel
FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (timeout)
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2
FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (timeout)
FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (timeout)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame
============================
sergiodj+
2015-09-09 20:47:00 UTC
Permalink
Buildslave:
wildebeest-debian-wheezy-i686

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/1830>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=619da3a637e07d23fdd1fc8cb5dc7cbc7006b9e1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
new FAIL: gdb.base/dprintf.exp: (the program exited)
new FAIL: gdb.base/dprintf.exp: 1st dprintf, gdb (the program is no longer running)
new FAIL: gdb.base/dprintf.exp: 2nd dprintf, gdb (the program is no longer running)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================
sergiodj+
2015-09-09 20:51:45 UTC
Permalink
Buildslave:
fedora-ppc64le-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-native-extended-gdbserver-m64/builds/1784>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-native-extended-gdbserver-m64/.git/tree/?h=master&id=3125d048e6bd61e8fd043b8bd9d32b37558216ca>

*** Regressions found ***
============================
new FAIL: gdb.base/checkpoint.exp: break1 four (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<7>>
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi set dprintf style to an unrecognized type (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (timeout)
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: inferior 1 exited (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/break.exp: run until breakpoint set at small function, optimized file (the program exited)
new FAIL: gdb.base/checkpoint.exp: break1 four (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout)
new FAIL: gdb.base/checkpoint.exp: break1 five (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: break1 six (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<3>>
new FAIL: gdb.base/checkpoint.exp: break1 seven (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<4>>
new FAIL: gdb.base/checkpoint.exp: break1 eight (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<5>>
new FAIL: gdb.base/checkpoint.exp: break1 nine (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<6>>
new FAIL: gdb.base/checkpoint.exp: break1 ten (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<7>>
new FAIL: gdb.base/checkpoint.exp: info checkpoints one (timeout)
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 0 one (timeout)
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 57 (timeout)
new FAIL: gdb.base/checkpoint.exp: break3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: Diff input and output one (timeout)
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 49 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 1 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout)
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 1 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 1 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 2 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 2 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 2 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 3 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<3>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 3 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 3 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 4 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<4>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 4 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 4 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 5 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<5>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 5 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 6 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<6>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 6 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: restart 7 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<7>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 7 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 7 two (timeout)
new FAIL: gdb.base/checkpoint.exp: Diff input and output two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 0 one (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 59 (timeout)
new FAIL: gdb.base/checkpoint.exp: break4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: delete copy1 (timeout)
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: restart 1 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 1 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 2 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 2 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 3 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 3 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 4 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 4 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 5 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 5 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 6 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 6 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 7 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 7 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 8 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 8 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 9 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 9 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 10 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 10 (timeout)
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints (timeout) <<3>>
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork two (timeout)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork three (timeout)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork four (timeout)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork five (timeout)
new FAIL: gdb.base/checkpoint.exp: info checkpoints two (timeout)
new FAIL: gdb.base/checkpoint.exp: kill all one (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 0 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 1 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 2 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 3 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 4 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 5 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 6 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 7 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 8 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 9 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 10 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break1 four (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break1 five (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break1 six (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<3>>
new FAIL: gdb.base/checkpoint-ns.exp: break1 seven (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<4>>
new FAIL: gdb.base/checkpoint-ns.exp: break1 eight (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<5>>
new FAIL: gdb.base/checkpoint-ns.exp: break1 nine (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<6>>
new FAIL: gdb.base/checkpoint-ns.exp: break1 ten (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<7>>
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 57 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 49 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<3>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<4>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<5>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<6>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two (timeout) <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<7>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one (timeout) <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 59 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: delete copy1 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: delete all breakpoints in delete_breakpoints (timeout) <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: delete all breakpoints in delete_breakpoints (timeout) <<3>>
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: kill all one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 0 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 1 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 2 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 3 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 4 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 5 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 6 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 7 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 8 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 9 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 10 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: Check inferior list
PASS -> FAIL: gdb.base/gdbinit-history.exp: truncation: appending: server show commands
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/interrupt.exp: child died when we called func1, skipped rest of tests
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (unknown output after running)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2 (got gdb prompt)
new FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 3 (got gdb prompt)
new FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 4 (got gdb prompt)
new FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5 (got gdb prompt)
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/fork-thread-pending.exp: 1, get to the fork event (timeout)
FAIL: gdb.threads/fork-thread-pending.exp: 1, multiple threads found (the program exited)
============================
sergiodj+
2015-09-09 21:17:33 UTC
Permalink
Buildslave:
wildebeest-debian-wheezy-i686

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-i686-native-gdbserver/builds/1816>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-gdbserver/.git/tree/?h=master&id=e5c7eaf7acc1d513679e7d7c29cb61e4417900c2>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
PASS -> FAIL: gdb.base/gnu-ifunc.exp: step
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
new FAIL: gdb.mi/mi-detach.exp: detach
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
============================
sergiodj+
2015-09-09 21:23:55 UTC
Permalink
Buildslave:
fedora-ppc64le-1

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-native-gdbserver-m64/builds/1777>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-native-gdbserver-m64/.git/tree/?h=master&id=e6e9d0fdb855dc45ecfa0d2d4d16052478426b32>

*** Regressions found ***
============================
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
new FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5 (got gdb prompt)
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.base/break.exp: run until breakpoint set at small function, optimized file (the program exited)
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/interrupt.exp: child died when we called func1, skipped rest of tests
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.mi/mi-detach.exp: detach
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf continue, agent (MI error)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2 (got gdb prompt)
new FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 3 (got gdb prompt)
new FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 4 (got gdb prompt)
new FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5 (got gdb prompt)
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
============================
sergiodj+
2015-09-09 21:56:07 UTC
Permalink
Buildslave:
wildebeest-debian-wheezy-i686

Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-i686-native-extended-gdbserver/builds/1814>

Commit(s) tested:
0b333c5e7d6c3fc65d37ffa11bd21ba52c4adb25

Author(s) (in the same order as the commits):
Pedro Alves <***@redhat.com>

Subject:
Merge async and sync code paths some more

Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-extended-gdbserver/.git/tree/?h=master&id=d6526af23a7fa9a3f5abdfd2b0d6aa9e69dcb22b>

*** Regressions found ***
============================
new FAIL: gdb.threads/attach-into-signal.exp: threaded: process is still running on the attempt # 1 of 100
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: next past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: same,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: Check inferior list
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: use correct executable (execd-prog) for run after follow exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: continue past exec
new FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: Check inferior list
PASS -> FAIL: gdb.base/gnu-ifunc.exp: step
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.threads/attach-into-signal.exp: threaded: process is still running on the attempt # 1 of 100
new FAIL: gdb.threads/execl.exp: continue until exit (the program exited)
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/dyn_arrayidx.exp: ptype array_type
FAIL: gdb.ada/mi_var_array.exp: Create bt varobj
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.ada/mi_var_array.exp: run to bar.adb:28 (exec-continue) (MI error)
FAIL: gdb.ada/mi_var_array.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=step: next over function call
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
============================

Continue reading on narkive:
Loading...